Designing two-dimensional halide perovskites for high-performance optoelectronic applications requires deep understanding of the structure-property relationship that governs their excitonic behaviors. However, a design framework that considers both intra and interlayer structures modified by the A-site and spacer cations, respectively, has not been developed. Here, we use pressure to synergistically tune the intra and interlayer structures and uncover the structural modulations that result in improved optoelectronic performance. Under applied pressure, (BA)2(GA)Pb2I7 exhibits a 72-fold boost of photoluminescence and 10-fold increase of photoconductivity. Based on the observed structural change, we introduce a structural descriptor χ that describes both the intra and interlayer characteristics and establish a general quantitative relationship between χ and photoluminescence quantum yield: smaller χ correlates with minimized trapped excitons and more efficient emission from free excitons. Building on this principle, we design a perovskite (CMA)2(FA)Pb2I7 that exhibits a small χ and an impressive photoluminescence quantum yield of 59.3%.
BACKGROUND: Fructose-1,6-bisphosphatase (FBPase) deficiency, caused by an FBP1 mutation, is an autosomal recessively inherited metabolic disorder characterized by impaired gluconeogenesis. Due to the rarity of FBPase deficiency, the mechanism by which the mutations cause enzyme activity loss still remains unclear. METHODS: We report a pediatric patient with typical FBPase deficiency who presented with hypoglycemia, hyperlactatemia, metabolic acidosis, and hyperuricemia. Whole-exome sequencing was used to search for pathogenic genes, Sanger sequencing was used for verification, and molecular dynamic simulation was used to evaluate how the novel mutation affects FBPase activity and structural stability. RESULTS: Direct and allele-specific sequence analysis of the FBP1 gene (NM_000507) revealed that the proband had a compound heterozygote for the c. 490 (exon 4) G>A (p. G164S) and c. 861 (exon 7) C>A (p. Y287X, 52), which he inherited from his carrier parents. His father and mother had heterozygous G164S and Y287X mutations, respectively, without any symptoms of hypoglycemia. CONCLUSION: Our results broaden the known mutational spectrum and possible clinical phenotype of FBP1.
Acidosis, Lactic , Fructose-1,6-Diphosphatase Deficiency , Hypoglycemia , Male , Humans , Child , Acidosis, Lactic/genetics , Fructose-1,6-Diphosphatase Deficiency/diagnosis , Fructose-1,6-Diphosphatase Deficiency/genetics , Fructose-Bisphosphatase/genetics , Fructose-Bisphosphatase/metabolism , Hypoglycemia/genetics , Mutation
Organic-inorganic halide perovskites possess unique electronic configurations and high structural tunability, rendering them promising for photovoltaic and optoelectronic applications. Despite significant progress in optimizing the structural characteristics of the organic cations and inorganic framework, the role of organic-inorganic interactions in determining the structural and optical properties has long been underappreciated and remains unclear. Here, by employing pressure tuning, we realize continuous regulation of organic-inorganic interactions in a lead halide perovskite, MHyPbBr3 (MHy+ = methylhydrazinium, CH3NH2NH2+). Compression enhances the organic-inorganic interactions by strengthening the Pb-N coordinate bonding and N-H···Br hydrogen bonding, which results in a higher structural distortion in the inorganic framework. Consequently, the second-harmonic-generation (SHG) intensity experiences an 18-fold increase at 1.5 GPa, and the order-disorder phase transition temperature of MHyPbBr3 increases from 408 K under ambient pressure to 454 K at the industrially achievable level of 0.5 GPa. Further compression triggers a sudden non-centrosymmetric to centrosymmetric phase transition, accompanied by an anomalous bandgap increase by 0.44 eV, which stands as the largest boost in all known halide perovskites. Our findings shed light on the intricate correlations among organic-inorganic interactions, octahedral distortion, and SHG properties and, more broadly, provide valuable insights into structural design and property optimization through cation engineering of halide perovskites.
Water in Earth's deep interior is predicted to be hydroxyl (OH-) stored in nominally anhydrous minerals, profoundly modulating both structure and dynamics of Earth's mantle. Here, we use a high-dimensional neuro-network potential and machine learning algorithm to investigate the weight percent water incorporation in stishovite, a main constituent of the subducted oceanic crust. We found that stishovite and water prefer forming medium- to long-range ordered superstructures, featuring one-dimensional (1D) water channels. Synthesizing single crystals of hydrous stishovite, we verified the ordering of OH- groups in the water channels through optical and nuclear magnetic resonance spectroscopy and found an average H-H distance of 2.05(3) Å, confirming simulation results. Upon heating, H atoms were predicted to behave fluid-like inside the channels, leading to an exotic 1D superionic state. Water-bearing stishovite could feature high ionic mobility and strong electrical anisotropy, manifesting as electrical heterogeneity in Earth's mantle.
Low-dimensional (low-D) organic metal halide hybrids (OMHHs) have emerged as fascinating candidates for optoelectronics due to their integrated properties from both organic and inorganic components. However, for most of low-D OMHHs, especially the zero-D (0D) compounds, the inferior electronic coupling between organic ligands and inorganic metal halides prevents efficient charge transfer at the hybrid interfaces and thus limits their further tunability of optical and electronic properties. Here, using pressure to regulate the interfacial interactions, efficient charge transfer from organic ligands to metal halides is achieved, which leads to a near-unity photoluminescence quantum yield (PLQY) at around 6.0â GPa in a 0D OMHH, [(C6 H5 )4 P]2 SbCl5 . In situ experimental characterizations and theoretical simulations reveal that the pressure-induced electronic coupling between the lone-pair electrons of Sb3+ and the π electrons of benzene ring (lp-π interaction) serves as an unexpected "bridge" for the charge transfer. Our work opens a versatile strategy for the new materials design by manipulating the lp-π interactions in organic-inorganic hybrid systems.
Two-dimensional (2D) van der Waals (vdW) materials, featuring relaxed phase-matching conditions and highly tunable optical nonlinearity, endow them with potential applications in nanoscale nonlinear optical (NLO) devices. Despite significant progress, fundamental questions in 2D NLO materials remain, such as how structural distortion affects second-order NLO properties, which call for advanced regulation and in situ diagnostic tools. Here, by applying pressure to continuously tune the displacement of Nb atoms in 2D vdW NbOI2, we effectively modulate the polarization and achieve a 3-fold boost of the second-harmonic generation (SHG) at 2.5 GPa. By introducing a Peierls distortion parameter, λ, we establish a quantitative relationship between λ and SHG intensity. Importantly, we further demonstrate that the SHG enhancement can be achieved under ambient conditions by anionic substitution to tune the distortion in NbO(I1-xBrx)2 (x = 0-1) compounds, where the chemical tailoring simulates the pressure effects on the structural optimization. Consequently, NbO(I0.60Br0.40)2 with λ = 0.17 exhibits a giant SHG of over 2 orders of magnitude higher than that in monolayer WSe2, reaching the record-high value among reported 2D vdW NLO materials. This work unambiguously demonstrates the correlation between Peierls distortion and SHG property and, more broadly, opens new paths for the development of advanced NLO materials by manipulating the structure distortions.
External mechanical stress alters the nature of chemical bonds and triggers novel reactions, providing interesting synthetic protocols to supplement traditional solvent- or thermo-based chemical approaches. The mechanisms of mechanochemistry have been well studied in organic materials made of a carbon-centered polymeric framework and covalence force field. They convert stress into anisotropic strain which will engineer the length and strength of targeted chemical bonds. Here, we show that by compressing silver iodide in a diamond anvil cell, the external mechanical stress weakens the Ag-I ionic bonds and activate the global diffusion of super-ions. In contrast to conventional mechanochemistry, mechanical stress imposes unbiased influence on the ionicity of chemical bonds in this archetypal inorganic salt. Our combined synchrotron X-ray diffraction experiment and first-principles calculation demonstrate that upon the critical point of ionicity, the strong ionic Ag-I bonds break down, leading to the recovery of elemental solids from a decomposition reaction. Instead of densification, our results reveal the mechanism of an unexpected decomposition reaction through hydrostatic compression and suggest the sophisticated chemistry of simple inorganic compounds under extreme conditions.
Water in the mantle transition zone and the core-mantle boundary plays a key role in Earth's stratification, volatile cycling, and core formation. If water transportation is actively running between the aforementioned layers, the lower mantle should contain water channels with distinctive seismic and/or electromagnetic signatures. Here, we investigated the electrical conductivity and sound velocity of ε-FeOOH up to 71 GPa and 1800 K and compared them with global tomography data. An abrupt three-order jump of electrical conductivity was observed above 50 GPa, reaching 1.24(12) × 103 S/m at 61 GPa. Meanwhile, the longitudinal sound velocity dropped by 16.8% in response to the high-to-low spin transition of Fe3+. The high-conductivity and low-sound velocity of ε-FeOOH match the features of heterogenous scatterers in the mid-lower mantle. Such unique properties of hydrous ε-FeOOH, or possibly other Fe-enriched phases can be detected as evidence of active water transportation in the mid-lower mantle.
Two-dimensional (2D) semiconductor heterostructures are key building blocks for many electronic and optoelectronic devices. Reconfiguring the band-edge states and modulating their interplay with charge carriers at the interface in a continuous manner have long been sought yet are challenging. Here, using organic semiconductor-incorporated 2D halide perovskites as the model system, we realize the manipulation of band-edge states and charge distribution via mechanical-rather than chemical or thermal-regulation. Compression induces band-alignment switching and charge redistribution due to the different pressure responses of organic and inorganic building blocks, giving controllable emission properties of 2D perovskites. We propose and demonstrate a "pressure gating" strategy that enables the control of multiple emission states within a single material. We also reveal that band-alignment transition at the organic-inorganic interface is intrinsically not well resolved at room temperature owing to the thermally activated transfer and shuffling of band-edge carriers. This work provides important fundamental insights into the energetics and carrier dynamics of hybrid semiconductor heterostructures.
Solids can be generally categorized by their structures into crystalline and amorphous states with different interactions among atoms dictating their properties. Crystalline-amorphous hybrid structures, combining the advantages of both ordered and disordered components, present a promising opportunity to design materials with emergent collective properties. Hybridization of crystalline and amorphous structures at the sublattice level with long-range periodicity has been rarely observed. Here, we report a nested order-disorder framework (NOF) constructed by a crystalline matrix with self-filled amorphous-like innards that is obtained by using pressure to regulate the bonding hierarchy of Cu12Sb4S13. Combined in situ experimental and computational methods demonstrate the formation of disordered Cu sublattice which is embedded in the retained crystalline Cu framework. Such a NOF structure gives a low thermal conductivity (~0.24 W·m-1·K-1) and a metallic electrical conductivity (8 × 10-6 Ω·m), realizing the collaborative improvement of two competing physical properties. These findings demonstrate a category of solid-state materials to link the crystalline and amorphous forms in the sublattice-scale, which will exhibit extraordinary properties.
Background: Myocardial ischemia-reperfusion injury (MIRI) is characterized by its high incidence rate and mortality. miR-199a-3p is thought to be strongly linked with the development of some myocardial diseases, but the influence of miR-199a-3p in MIRI remains unclear. Methods: AC16 cells were used. The concentrations of mammalian target of rapamycin (mTOR), light chain 3 II/light chain 3 I, and Beclin-1 were detected with western blotting and qRT-PCR. The binding site between mTOR and miR-199a-3p was evaluated via luciferase report assay. Cell apoptosis was evaluated through flow cytometry. Results: Knockdown of miR-199a-3p accelerated the myocardial cell injury after L-oxygen treatment. Increased expression of mTOR and suppressed autophagy were observed after knockdown of miR-199a-3p. Knockdown of miR-199a-3p or overexpression of mTOR greatly aggravated cell injury through inhibiting autophagy. Conclusions. This study might be helpful for the therapeutic method of MIRI through by regulating miR-199a-3p/mTOR.
MicroRNAs , Apoptosis/genetics , Autophagy/genetics , MicroRNAs/genetics , MicroRNAs/metabolism , Myocytes, Cardiac/metabolism , TOR Serine-Threonine Kinases/metabolism
Identifying ordering in non-crystalline solids has been a focus of natural science since the publication of Zachariasen's random network theory in 1932, but it still remains as a great challenge of the century. Literature shows that the hierarchical structures, from the short-range order of first-shell polyhedra to the long-range order of translational periodicity, may survive after amorphization. Here, in a piece of AlPO4, or berlinite, we combine X-ray diffraction and stochastic free-energy surface simulations to study its phase transition and structural ordering under pressure. From reversible single crystals to amorphous transitions, we now present an unambiguous view of the topological ordering in the amorphous phase, consisting of a swarm of Carpenter low-symmetry phases with the same topological linkage, trapped in a metastable intermediate stage. We propose that the remaining topological ordering is the origin of the switchable "memory glass" effect. Such topological ordering may hide in many amorphous materials through disordered short atomic displacements.
Scandium (Sc) is the lightest non-main-group element and transforms to a host-guest (H-G) incommensurate structure under gigapascal (GPa) pressures. While the host structure is stable over a wide pressure range, the guest structure may exist in multiple forms, featuring different incommensurate ratios, and mixing up to generate long-range "disordered" guest structures. Here, we employed the recently developed global neural network (g-NN) potential and the stochastic surface walking (SSW) global optimization algorithm to explore the global potential energy surface of Sc under various pressures. We probe the global minima structure in a system made of hundreds of atoms and revealed that the solid-phase transition between Sc-I and H-G Sc-II phases is fully reconstructive in nature. Above 62.5 GPa, the pressure will further destabilize the face-centered tetragonal (fct, Sc-IIa) guest structure to a body-centered tetragonal phase (bct, Sc-IIb), while sustaining the host structure. The structural transition mechanism of this work will shed light on the nature of the complex H-G structural modifications in compressed metals.
Diamond is the hardest known material in nature and features a wide spectrum of industrial and scientific applications. The key to diamond's outstanding properties is its elasticity, which is associated with its exceptional hardness, shear strength, and incompressibility. Despite many theoretical works, direct measurements of elastic properties are limited to only â¼1.4 kilobar (kb) pressure. Here, we report ultrasonic interferometry measurements of elasticity of void-free diamond powder in a multianvil press from 1 atmosphere up to 12.1 gigapascal (GPa). We obtained high-accuracy bulk modulus of diamond as K0 = 439.2(9) GPa, K0' = 3.6(1), and shear modulus as G0 = 533(3) GPa, G0' = 2.3(3), which are consistent with our first-principles simulation. In contrast to the previous experiment of isothermal equation of state, the K0' obtained in this work is evidently greater, indicating that the diamond is not fully described by the "n-m" Mie-Grüneisen model. The structural and elastic properties measured in this work may provide a robust primary pressure scale in extensive pressure ranges.
As the reaction product of subducted water and the iron core, FeO2 with more oxygen than hematite (Fe2O3) has been recently recognized as an important component in the D" layer just above the Earth's core-mantle boundary. Here, we report a new oxygen-excess phase (Mg, Fe)2O3+ δ (0 < δ < 1, denoted as 'OE-phase'). It forms at pressures greater than 40 gigapascal when (Mg, Fe)-bearing hydrous materials are heated over 1500 kelvin. The OE-phase is fully recoverable to ambient conditions for ex situ investigation using transmission electron microscopy, which indicates that the OE-phase contains ferric iron (Fe3+) as in Fe2O3 but holds excess oxygen through interactions between oxygen atoms. The new OE-phase provides strong evidence that H2O has extraordinary oxidation power at high pressure. Unlike the formation of pyrite-type FeO2Hx which usually requires saturated water, the OE-phase can be formed with under-saturated water at mid-mantle conditions, and is expected to be more ubiquitous at depths greater than 1000 km in the Earth's mantle. The emergence of oxygen-excess reservoirs out of primordial or subducted (Mg, Fe)-bearing hydrous materials may revise our view on the deep-mantle redox chemistry.
Understanding the mineralogy of the Earth's interior is a prerequisite for unravelling the evolution and dynamics of our planet. Here, we conducted high pressure-temperature experiments mimicking the conditions of the deep lower mantle (DLM, 1800-2890 km in depth) and observed surprising mineralogical transformations in the presence of water. Ferropericlase, (Mg, Fe)O, which is the most abundant oxide mineral in Earth, reacts with H2O to form a previously unknown (Mg, Fe)O2H x (x ≤ 1) phase. The (Mg, Fe)O2H x has a pyrite structure and it coexists with the dominant silicate phases, bridgmanite and post-perovskite. Depending on Mg content and geotherm temperatures, the transformation may occur at 1800 km for (Mg0.6Fe0.4)O or beyond 2300 km for (Mg0.7Fe0.3)O. The (Mg, Fe)O2H x is an oxygen excess phase that stores an excessive amount of oxygen beyond the charge balance of maximum cation valences (Mg2+, Fe3+ and H+). This important phase has a number of far-reaching implications including extreme redox inhomogeneity, deep-oxygen reservoirs in the DLM and an internal source for modulating oxygen in the atmosphere.
Metal halide perovskites possess unique atomic and electronic configurations that endow them with high defect tolerance and enable high-performance photovoltaics and optoelectronics. Perovskite light-emitting diodes have achieved an external quantum efficiency of over 20%. Despite tremendous progress, fundamental questions remain, such as how structural distortion affects the optical properties. Addressing their relationships is considerably challenging due to the scarcity of effective diagnostic tools during structural and property tuning as well as the limited tunability achievable by conventional methods. Here, using pressure and chemical methods to regulate the metal off-centering distortion, we demonstrate the giant tunability of photoluminescence (PL) in both the intensity (>20 times) and wavelength (>180 nm/GPa) in the highly distorted halide perovskites [CH3NH3GeI3, HC(NH2)2GeI3, and CsGeI3]. Using advanced in situ high-pressure probes and first-principles calculations, we quantitatively reveal a universal relationship whereby regulating the level of off-centering distortion towards 0.2 leads to the best PL performance in the halide perovskites. By applying this principle, intense PL can still be induced by substituting CH3NH3 + with Cs+ to control the distortion in (CH3NH3)1-xCsxGeI3, where the chemical substitution plays a similar role as external pressure. The compression of a fully substituted sample of CsGeI3 further tunes the distortion to the optimal value at 0.7 GPa, which maximizes the emission with a 10-fold enhancement. This work not only demonstrates a quantitative relationship between structural distortion and PL property of the halide perovskites but also illustrates the use of knowledge gained from high-pressure research to achieve the desired properties by ambient methods.
The discovery of graphite transition to transparent and superhard carbons under room-temperature compression (Takehiko, et al., Science, 1991, 252, 1542 and Mao, et al., Science, 2003, 302, 425) launched decades of intensive research into carbon's structural polymorphism and relative phase transition mechanisms. Although many possible carbon allotropes have been proposed, experimental observations and their transition mechanisms are far from conclusive. Three longstanding issues are: (i) the speculative structures inferred by amorphous-like XRD peaks, (ii) sp2 and sp3 bonding mixing, and (iii) the controversies of transition reversibility. Here, by utilizing the stochastic surface walking method for unbiased pathway sampling, we resolve the possible atomic structure and the lowest energy pathways between multiple carbon allotropes under high pressure. We found that a new transition pathway, through which graphite transits to a highly disordered phase by shearing the boat architecture line atoms out of the graphite (001) plane upward or downward featuring without the nuclei core, is the most favorable. This transition pathway facilitates the generation of a variety of equally favorable carbon structures that are controlled by the local strain and crystal orientation, resembling structural disordering. Our results may help to understand the nature of graphite under room temperature compression.
Pressure is a unique thermodynamic variable to explore the phase competitions and novel phases inaccessible at ambient conditions. The resistive switching material GaTa4Se8 displays several quantum phases under pressure, such as a Jeff = 3/2 Mott insulator, a correlated quantum magnetic metal, and d-wave topological superconductivity, which has recently drawn considerable interest. Using high-pressure Raman spectroscopy, X-ray diffraction, extended X-ray absorption, transport measurements, and theoretical calculations, we reveal a complex phase diagram for GaTa4Se8 at pressures exceeding 50 GPa. In this previously unattained pressure regime, GaTa4Se8 ranges from a Mott insulator to a metallic phase and exhibits superconducting phases. In contrast to previous studies, we unveil a hidden correlation between the structural distortion and band gap prior to the insulator-to-metal transition, and the metallic phase shows superconductivity with structural and magnetic properties that are distinctive from the lower-pressure phase. These discoveries highlight that GaTa4Se8 is a unique material to probe novel quantum phases from a structural, metallicity, magnetism, and superconductivity perspective.
Pressure processing is efficient to regulate the structural and physical properties of two-dimensional (2D) halide perovskites which have been emerging for advanced photovoltaic and light-emitting applications. Increasing numbers of studies have reported pressure-induced and/or enhanced emission properties in the 2D halide perovskites. However, no research has focused on their photoresponse properties under pressure tuning. It is also unclear how structural change affects their excitonic features, which govern the optoelectronic properties of the halide perovskites. Herein, we report significantly enhanced photocurrents in the all-inorganic 2D perovskite Cs2PbI2Cl2, achieving over 3 orders of magnitude increase at the industrially achievable level of 2 GPa in comparison with its initial photocurrent. Lattice compression effectively regulates the excitonic features of Cs2PbI2Cl2, reducing the exciton binding energy considerably from 133 meV at ambient conditions to 78 meV at 2.1 GPa. Impressively, such a reduced exciton binding energy of 2D Cs2PbI2Cl2 is comparable to the values of typical 3D perovskites (MAPbBr3 and MAPbI3), facilitating the dissociating of excitons into free carriers and enhancing the photocurrent. Further pressurization leads to a layer-sliding-induced phase transition and an anomalous negative linear compression, which has not been observed so far in other halide perovskites. Our findings reveal the dramatically enhanced photocurrents in the 2D halide perovskite by regulating its excitonic features and, more broadly, provide new insights into materials design toward extraordinary properties.
